When a repeat backup calls for jetting
A line that clogs again every few weeks, a restaurant or home kitchen with constant grease trouble, or a main line backing up right now are the situations where jetting earns its cost. Our line is open 24/7 and we book the earliest visit we can.
While you wait for a visit:
- Stop sending water down the affected drains.
- Keep grease, wipes and food scraps out of the system until the line is clean.
- Note which fixtures back up first, because that points to where the blockage sits.
- If water is already rising, keep everyone away from the affected area and call right away.
How hydro jetting works
A jetter pumps water through a hose fitted with a nozzle that fires jets forward and backward. The forward jets break through a clog and the rear jets pull the hose along the pipe while they scrub the walls. The result is a full-width clean, not just a channel through the middle.
Pressure and nozzle choice matter. Using too much on a fragile old pipe risks damage, so we match the nozzle and pressure to the pipe material and condition, and we look with a camera when the line's condition is unknown.
Jetting compared with cabling
Both have their place. Here is how they differ.
| Cable machine | Hydro jetting | |
|---|---|---|
| Best at | Soft clogs and quick fixes | Grease, scale and root growth on pipe walls. |
| Leaves behind | A narrow channel | A clean full-bore pipe. |
| Typical use | Single sink, tub or short run | Main lines, kitchen lines and repeat clogs. |
| Risk | Can snag on damaged pipe | Not suited to cracked or collapsed pipe without a camera look first. |
For the simpler approach on a minor clog, start with drain cleaning.
Where jetting makes the most sense
Kitchen lines in busy households and commercial kitchens are the classic case, because grease builds in layers that a cable only punctures. Lines with root growth often respond too, though roots will regrow unless the pipe joint is repaired.
If a camera shows that the pipe itself is damaged, jetting will not hold, and a sewer line repair is the real answer. For restaurants and shops that need after-hours help, see commercial plumbing.
Getting ready for a jetting visit
A few minutes of preparation makes the job faster. Clear the area around the cleanout, move stored items away from the access point and make sure we can reach the lowest drain in the house. If the cleanout is outdoors, mark any sprinkler heads or fragile landscaping near it.
Tell us what you have already tried, including any store-bought drain chemicals. Chemicals left sitting in a line can splash back during cleaning, so we handle them with care and adjust the method to suit.
Older streets and mixed pipe materials
Trussville grew in stages, from the Chalkville Road neighborhoods of the 1930s and 40s to the I-59 and I-459 growth of the 1980s. That means one town can hold clay, cast iron and plastic drain pipe, sometimes on the same street.
Each material tolerates jetting differently, which is why we ask about the age of the house and look with a camera when the pipe is an unknown.
Same line backing up again? Call the 24/7 line and ask about jetting.
Call (205) 896-0120What affects the price of hydro jetting
Ask for a clear price before work starts. These are the drivers.
Length and diameter
Longer and larger lines need more time and equipment.
What is in the line
Heavy grease or roots take more passes.
Access
A cleanout makes the job straightforward.
Camera inspection
Looking first keeps jetting from being used on a pipe that cannot take it.
Timing
Night and weekend calls are quoted as emergency work.
Insurance seldom covers cleaning, though a water backup endorsement may cover resulting damage. Ask your agent.
Pipe condition and the limits of pressure
Cast iron, clay and plastic drain pipe are each made to different standards and tolerate different pressures. That is why we look with a camera first when the material is unknown.
Always follow the pipe manufacturer's guidance and local code for work on a drain line, and ask us if you are unsure what you have.
Hydro jetting questions
Yes. Our line is open 24/7. If a line is backing up and jetting is the right tool, we book the earliest visit we can.
It depends on the pipe. Sound cast iron and clay can handle it. Cracked, thin or collapsed pipe cannot, and a camera inspection first tells us which you have.
A properly jetted line stays clean for a long time if the pipe is sound and the household avoids pouring grease down the drain. Root regrowth is the exception.
Yes. We serve Pinson, Leeds, Clay and Springville as well.
For grease and scale, yes. For a simple hair clog in a tub, a snake is quicker and cheaper. We pick the tool that fits the problem.
